|
Wall Plates and Stud Boxes - We can configure these boxes / plates to your exact specifications |
|
Stud Box - Wall Boxes |
Choose from the connectors below for Stud Boxes or Wall Plates |
|
|
Stud Box-12 Large Enclosure Wall Box - CLICK HERE
UP TO 48 connectors of your choice.
Designed to mount between standard 16 inch (on center) studs.
Inside dimensions of box are 14.5" wide, 12.25" high and 4" deep.
Outside dimensions of faceplate are 17" wide, 14" high.
Lockable lid for added security.
Each box is custom designed with connector configuration of your choice. |
|
|
UP TO 32 connectors of your choice.
Designed to mount between standard 16 inch (on center) studs.
Inside dimensions of box are 14.5" wide, 6.25" high and 4" deep.
Outside dimensions of faceplate are 17.125" wide, 8.575" high.
Lockable lid for added security.
Each box is custom designed with connector configuration of your choice. |
|
| Stud Boxes and Wall Plates |
Choose from these connectors for Stud Boxes or Wall Plates
If you don't see your connector here, call us, we can probably get it for you. |
*Feedthru connector - A feedthru connector provides a plug-in connector on the front and back of the connector plate.
This allows you to plug a pre-made cable with connector installed into the back of the connector plate as well as the front. |
 |
 |
 |
 |
 |
 |
|
 |
|
H3FP
XLR Female |
H3MP
XLR Male |
HJ3P
TRS 1/4" |
HJ2P
TS 1/4" |
RCA and
RCA *Feedthru |
3.5 MM TRS
and 3.5MM TRS
*Feedthru |
3.5 MM TS
and 3.5MM TS
*Feedthru |
BNC and BNC
*Feedthru |
 |
 |
|
 |
 |
 |
 |
 |
|
NCJ6FI-S
Combo
XLRF & TRS |
NL2MP
2 Pole
Speak-On |
NL4MP
4 Pole
Speak-On |
NL8MPR
8 Pole
Speak-On |
Cat5E and Cat5E
*Feedthru |
VGA 15 Pin
and VGA 15 Pin
*Feedthru |
DVI
*Feedthru
(Only) |
Duplex AC
20/30 Amp | |
|
For Wall Plates, PLEASE CALL US Toll Free - 1-877-802-0416 |
|
WALL PLATES
Have us load connectors for you
(Neutrik or Horizon connectors)
|
Wall plates are available in three finishes
|
Stainless
Steel |
Black
Anodized |
Clear
Anodized |
Select the wall plate SIZE you want below.
On the next page you can choose your FINISH and your choice of CONNECTORS or choose a blank plate or a pre-punched plate for your connectors. |
|
|
|
|
Triple Gang Wall Plates
Plate Dimensions (Inches): Width 6-3/8 x Height 4-1/2
Ideal for mounting up to six connectors of your choice.
Designed to mount on a standard Triple Gang Electric Wall Box.
|
  |
Double Gang Wall Plates
Plate Dimensions (Inches): Width 4-9/16 x Height 4-1/2
Ideal for mounting up to four connectors of your choice.
Designed to mount on a standard Double Gang Electric Wall Box.
|
  |
Single Gang Wall Plates
Plate Dimensions (Inches): Width 2-3/4 x Height 4-1/2
Ideal for mounting up to two connectors of your choice.
Designed to mount on a standard Single Gang Electric Wall Box. |
