|
Stud Box-12- We can configure these boxes to your exact specifications |
|
Large Enclosure
Wall Box
Up to 48 connectors
of your choice
If you don't see your connector here, call us, we can probably get it for you.
TOLL FREE:
1-877-802-0416 |
Designed to mount between standard 16 inch (on center) studs.
Inside dimensions of box are 14.5" wide, 12.25" high and 4" deep.
Outside dimensions of faceplate are 17" wide, 14" high.
Lockable lid for added security.
Each box is custom designed with connector configuration of your choice. |
|
Choose from these connectors on the next page
If you don't see your connector here, call us, we can probably get it. |
 |
 |
 |
 |
 |
 |
|
 |
|
H3FP
XLR Female |
H3MP
XLR Male |
HJ3P
TRS 1/4" |
HJ2P
TS 1/4" |
RCA and
RCA Feedthru |
3.5 MM TRS
and 3.5MM TRS
Feedthru |
3.5 MM TS
and 3.5MM TS
Feedthru |
BNC and BNC
Feedthru |
 |
 |
|
 |
 |
 |
 |
 |
|
NCJ6FI-S
Combo
XLRF & TRS |
NL2MP
2 Pole
Speak-On |
NL4MP
4 Pole
Speak-On |
NL8MPR
8 Pole
Speak-On |
Cat5E and Cat5E
Feedthru |
VGA 15 Pin
and VGA 15 Pin
Feedthru |
DVI
Feedthru
(Only) |
Duplex AC
20/30 Amp | |
|
XLR-F, XLR-M, 1/4" TS or TRS, BNC, BNC Feedthru, RCA, RCA Feedthru, DVI Feedthru, Composite video (RYW),
VGA, VGA Feedthru, Speak-on 2, 4 or 8 Pin, Banana, Cat5E, Cat5E Feedthru, Cat6, Cat6 Feedthru, 20 Amp AC Grounded Duplex.
Feedthru connector - A feedthru connector provides a plug-in connector on the top and bottom of the connector plate.
This allows you to plug a pre-made cable with connector installed into the bottom of the connector plate as well as the top.
IMPORTANT NOTES:
|
15/20 Amp AC Duplex counts as TWO connectors. |
|
Cat5E (RJ45) are an additional $7.00 - Cat5E (RJ45) Feedthrus are an additional $12.00 per connector. |
|
RJ11 Telephone, RCA, BNC and 3.5MM Feedthru connectors are an additional $4.00 per connector. |
|
VGA connectors are an additional $10.00 per connector - VGA Feedthrus are an additional $18.00 per connector. |
|
DVI connectors are available as Feedthru only - DVI Feedthru connectors are an additional $21.00 per connector. |
|
Neutrik NL8MP Speak-on 8 Pin connectors are an additional $9.00 per connector. |
|
If you need just holes punched without a connector, the charge is $3.00 per hole. |
If you need lettering (or numbers) there is a charge as follows:
1-10 letters/numbers = $5.00; 11-20 letters/numbers = $10.00;
21-30 letters/numbers = $15.00; 31-40 letters/numbers = $20.00 | | |
How to order:
AC Duplex counts as TWO.
Determine total number of connectors, then select the proper Stud Box below to get started: |
