|
Shure WH20QTR Dynamic Headset Microphone This version is designed with a 1/4 Inch Male connector for Shure Wireless. (See other options below) The Shure WH20QTR is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. Suitable for any voice communications application where comfort and reliability are required. The WH20 QTR has a cardioid (unidirectional) pickup pattern This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation. An integrated elastic headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. WH20 is supplied with foam windscreen and clothing clip. - WH20QTR - Includes a right-angle 1/4 inch phone plug for use with Shure Headset Wireless Microphone Systems, or any unbalanced microphone input.
- WH20TQG - Includes a a miniature four-pin female 4-pin mini connector for direct connection to Shure wireless body pack transmitters.
-
WH20XLR (Hard Wired) - Includes three-pin male XLR connector with a convenient detachable belt clip. Shure WH20QTR Dynamic Headset Microphone Features Lightweight wireframe and headband adjust for a secure, comfortable fit Extra-strong, small-diameter attached microphone cable resists breakage Collapsible microphone boom for easy storage and transportation Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones High input clipping level eliminates overload distortion Reliable at temperature and humidity extremes Supplied foam windscreen and clothing clip Shure WH20QTR Dynamic Headset Microphone Specifications Type Dynamic, Close-Talking Frequency Response (at 8 mm) 50 to 15,000 Hz Polar Pattern Cardioid (unidirectional) response -- uniform with frequency, symmetrical about axis Impedance Microphone rating impedance is 150 ohms (200 ohms actual) Output Level (close talked (at 12.5 mm (1/2 inch)) at 1,000 Hz) Open Circuit Voltage: -67.0 db/Pa (0.45 mV) (1 Pa = 94 dB SPL) Hum Sensitivity 38.4 dB equivalent SPL in a 1 millioersted field Polarity - WH20XLR as a wired microphone:
-
Positive sound pressure on diaphragm produces positive voltage on tip with respect to sleeve (ground) of microphone output phone plug connector. -
- WH20QTR, WH20TQG are used with Shure Wireless Systems:
- 1/4-inch Phone Jack Receiver Outputs: Positive sound pressure on diaphragm produces positive voltage on tip of receiver output connector.
-
3-pin XLR Receiver Outputs: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of low-impedance output connector, and on tip of Aux output connector. -
- WH20XLR as a wired microphone:
- Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of microphone output XLR connector.
Environmental Conditions Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F) Storage Temperatures: -29 to 74 degreesC (-20 to 165 degrees F) Humidity: 0 to 95% Cable Attached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor. Cable Connector WH20XLR: Three-pin XLR with detachable belt clip Construction Black thermoplastic housing; stainless steel grille; black TEFLON®-coated stainless steel wireframe; flexible plastic-clad monel gooseneck; rubber/nylon elastic headband |
