Shure PSM 200 P2T Wireless TransMixer Transmitter, PSM 200 In-Ear Monitor System

The Shure P2T TransMixer is a breakthrough design for in-ear monitoring. The Shure PSM 200 In-Ear Monitor System allows the user to connect two line-level or mic level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, use line outputs from a mixing console, or connect it to Shure's AuxPander. In short, no matter what the output device, you can probably plug it into the TransMixer.

P2T Wireless TransMixer
	Key Features
	Built-in audio limiter Front mounted antenna Two mic/line input channels for mix control 1/2 Rack space
	Operating Controls
	Input level control Frequency select
	LED Indicators
	Tri-color input level Frequency
	Inputs
	Two Mic/line, XLR-1/4 in. combo input channels
	Outputs
	Two XLR split outputs

RF Output Power

30 mW (+15 dBm) typical conducted (country dependent)

Modulation Limiter

Internal peak limiter (>10:1 hard knee compression)

Antenna

1/4 Wavelength, semi-rigid, PCB Mount

P2T Audio Input

Connector Type:XLR-1/4-inch combo

Configuration:electronically balanced

Actual Impedance:1 kilohm

Nominal Input Level:­25 dBu @ 1/2 volume (12 o'clock)

Maximum Input Level:­5 dBu @ 1/2 volume (12 o'clock)

Pin Assignments:

XLR: 2=hot; 3=cold, 1=ground

1/4: Tip = hot, Ring = cold, Sleeve=ground

Phantom Power Protection?Yes: Up to 52 Vdc

Current

170 mA maximum

Dimensions

220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)

Net Weight

370 g (13 oz.)

P2T Audio OutputsPassive connection parallel with input.

Connector Type:XLR

Configuration:electronically balanced

Pin Assignments:2 = hot ; 3 = cold, 1 = ground

Phantom Power Protection?Yes: Up to 52 Vdc

Power Requirements

Operating voltage 12-18 Vdc

Supplied with one of the following external power supplies:

Model PS20: 120 VAC, 60 Hz input.

Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input.