|
Shure P2R Hybrid Bodypack Receiver, PSM 200
Earphones are an option - See above
The Shure PSM 200 P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired or wireless receiver, or both at the same time. This and other unique features, plus excellent sound quality, make the Shure P2R an exceptional value.
- Key Features: Operates as a wired or wireless bodypack, or both simultaneously
-
Other Features: Frequency locator, Built-in headphone limiter, Integrated cable management, High-impact plastic chassis, 1/4" Line input jack with high/low gain switch
-
Operating Controls: Volume knob, Frequency select
-
LED Indicators: Power, RF reception, Frequency, Limiter, Low battery
Shure P2R Specifications
RF Sensitivity
-109 dBm typical
Squelch Threshold
-102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.) |
