|
Shure Beta98S Miniature Supercardioid Condenser Microphone- Beta 98S
This item has been discontinued.
Suggested Applications: Strings, Brass/Saxophone, Woodwinds
The Shure Beta98S is a compact, high-output, supercardioid condenser microphone for professional sound reinforcement and studio recording. Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.
Type - Condenser (electret bias)
- Frequency Response
-
20 to 20,000 Hz
-
(measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)
-
- Polar Pattern
-
Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
-
- Output Level (at 1,000 Hz)
-
Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical
-
*1 Pa = 94 dB SPL
-
- Maximum SPL
-
(20 Hz to 20 kHz, less than 1% THD)
-
2.5 kilohm load: 160 dB
-
1 kilohm load: 156 dB
-
- Preamplifier Output Clipping Level
-
(20 Hz to 20 kHz, less than 1% THD)
-
2.5 kilohm load: + 6 dBV (2.0 V)
-
1 kilohm load: + 2 dBV (1.26 V)
-
- Dynamic Range
-
(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)
-
125 dB (max SPL minus A-weighted noise)
-
- Output Noise
-
35 dB SPL, A-weighted
-
- Signal-to-Noise Ratio
-
59 dB re 94 dB SPL
-
- Output Impedance
-
Rated at 150 ohms (actual)
-
Recommended minimum load impedance: 1 kilohm
-
- Hum Pickup
-
-7.5 dB equivalent SPL in 1 mOe field (60Hz)
-
- Polarity
-
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
-
- Phantom Power
-
48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
-
- Cable
-
BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors.
-
BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.
-
- Case
-
Microphone: Matte black enamel brass case and stainless steel inner grille
-
Preamplifier: Matte black enamel finished steel
-
- Dimensions
-
Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)
-
Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in)
-
- Net Weight
-
Microphone: 12 g (0.4 oz) less cable
-
Preamplifier: 96 g (3.4 oz) |