SENNHEISER SKM2000XP BLACK WIRELESS MICROPHONE TRANSMITTER, SKM2000XP
Designed to operate with Sennheiser 2000 BLACK Series Wireless Receivers on the same frequency
It's all in the design. The hand-held transmitter of the 2000 series shows its strength: during use, in its performance, in its features. Sennheiser's technical know-how is shown through its switchable transmission power, intuitive menu navigation, an easy-to-read graphic display and external charging contacts for charging the optional rechargeable batteries directly. SKM2000XP is compatible with all ew capsules, including the MMK 965-1 true condenser capsule, whose wired version, e 965 E965, has already proven to be a great success. CHOOSE COLOR ABOVE: Nickel or black
SENNHEISER SKM2000XP BLACK MICROPHONE WIRELESS TRANSMITTER FEATURES
Rugged metal housing
Up to 75 MHz switching bandwidth
20 fixed frequency bands with up to 64 compatible presets
6 banks each with up to 64 tunable channels
Frequency setting in 25 kHz steps
Pilot tone squelch for interference-free operation
External charging contacts for recharging battery BA 2015 in the transmitter
Backlit display on transmitter (keystroke activation)
Auto-lock feature to prevent buttons from accidently being pressed
Audio and RF MUTE feature for muting the transmitter
Transmitters can be configured from the receiver menu
Possible to synchronize with the receiver using infrared interface
Wide range of accessories for virtually any use
SENNHEISER SKM2000XP Includes:
SKM2000XP hand-held transmitter
2 AA 1.5 V batteries
Microphone clip
8 color-coded rings
Instruction manual
Supplementary frequency sheet
Supplementary RF power sheet
SENNHEISER SKM2000XP Technical Data
| Modulation | FM |
| RF frequency range | 516 - 865 MHz |
| Carrier frequency | max. 3,000 |
| Presets | max. 64 |
| Switching bandwidth | max. 75 MHz |
| RF output power | 100 mW |
| Nominal deviation | ±24 kHz |
| Peak deviation | ±48 kHz |
| Compander | HDX |
| Frequency response | 80 - 18,000 Hz |
| Total harmonic distortion (THD) | < 0.9% |
| Signal-to-noise-ratio | ≥ 120 dBA (@ 1mV peak deviation) |
| In compliance with | CE, FCC IC |
| Power supply | 2 x 1.5 V (AA) |
| Operating time (transmitter) | typ. 8 h |
| Dimensions (transmitter) | 50 x 265 mm |
| Weight (transmitter) | 450 g |