|
QSC AD-S52T Two-Way 5.25" Surface Mount Speaker, Monitor 70V/100V Transformer Installed Perfect for hotels, restaurants, convention facilities, and multimedia environments! The QSC AcousticDesign AD-S52T is a full range, surface mount loudspeaker with sleek, contemporary styling that fits perfectly into multiple environments and applications including hotels, restaurants, convention facilities, and multimedia environments. The loudspeaker's low frequency driver is magnetically shielded, making the AD-S52T perfect for use near video monitors. Available in black or white, these great sounding, weather resistant enclosures can be painted to match any specific decor. The AD-S52 is a high output, 2-way design incorporating a 5.25" weatherproof, LF transducer and a 1" neodymium tweeter. This exceptional loudspeaker carries the added benefit of built-in dynamic power protection - thus ensuring system reliability in the event of overload conditions.
The AD-S52T models are equipped with a 70V/100V matching transformer for distributed audio systems. There is a transformer tap switch on the rear panel for setting the power level of the loudspeaker. This switch may also be set for 8-ohm operation, bypassing the transformer completely - providing greater system flexibility compared to most competing products.
The AD-S52 system package includes a ball mount assembly for convenient installation of the enclosure in a wide variety of orientations. If desired, the ball mount adapter's back plate can be removed, reducing the overall depth of the assembly and the footprint of the mount on the wall. Further, the assembly includes a weather resistant input connection cover to protect the 5-way binding post input terminals. "SELECT COLOR ON CHECKOUT PAGE". Also available as an 8 ohm speaker without 70V / 100V Transformer installed. Features: | SPECIFICATIONS | AD-S52 | AD-S52T | | Configuration | Compact two way, ported enclosure | Compact two way, ported enclosure | Transducers
Low Frequency Transducer
High Frequency Transducer |
5.25" shielded, weather-resistant
1" neodymium tweeter |
5.25" shielded, weather-resistant
1" neodymium tweeter | Frequency Range 1
Frequency Response (±3 dB)
Useable Frequency Range (-10 dB) |
75 Hz - 19 kHz
60 Hz - 20 kHz |
75 Hz - 19 kHz
60 Hz - 20 kHz | Maximum Output 2
Continuous
Peak
|
104 dB SPL
110 dB SPL
|
104 dB SPL
110 dB SPL | | Nominal Impedance | 8 ohms | Switchable 8 ohms | Power Rating 3
| 60 W (IEC, 100 hours)
| 60 W (IEC, 100 hours) | | Recommended Max Amp Power | 120 W RMS | 120 W RMS | | Sensitivity 4 | 86.5 dB, 2.83 V, 1 m, free field (4pi) | 86 dB, 2.83 V, 1 m, free field (4pi) | | Nominal Coverage | 90° H x 90° V | 90° H x 90° V | TRANSFORMERS | | Type | n/a | Custom low distortion laminated core, wide bandwidth design | | Taps | n/a | 70V 30, 15, 7.5, 3.75 Watts
100V 30, 15, 7.5 Watts | ENCLOSURE | | Material | Injection molded, weather resistant,
high impact polystyrene | | Finish | White or black (paintable) | | Weather Resistance | Yes | | Grille | Heavy duty powder coated aluminum | | Connectors | Pair of 5-way binding posts | | Mounting Hardware | Included ball mount assembly; available optional yoke mount | | Weight | 15 lb. (6.8 kg) net
22 lb. (10 kg) shipping | 18 lb (8.2 kg) net
25 lb (11.4 kg) shipping |
1All frequency ranges specified refer to measured free field response (full space, 4pi)
2Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3Continuous IEC specified test signal
4Based on nominal impedance, measured in full-space.
|
