Nady SMK2 SCM-900 / CM90 Studio Microphone Package

This package combines a pair of very affordable and useful studio mics. The SCM 900 is a large diaphragm cardioid mic perfect for recording studio vocals, acoustic instruments, orchestras, choral groups, ambient instrument audio, and numerous live sound applications. It features a large, pressure-gradient condenser, gold-sputtered diaphragm, and FET preamplifier for warm, natural reproduction of the most subtle to the most powerful audio sources. Requires 48V phantom power. Internal shockmount construction for the highest structural integrity and rugged reliability. With transformer-coupled balanced outputs, true condenser design (elements constantly biased by the preamp), full frequency response, and transparent audio.

The CM 90 is a classic cardioid small-diaphragm (3/4") condenser mic ideal for recording and stage reinforcement of acoustic guitar, drum overheads, hi-hats, snares, piano, and horns. Features high sensitivity, extended smooth, full frequency response and very high SPL capability. Requires 48V phantom power. Transformerless design for minimal self-noise and increased dynamic range. Rugged turned-brass housing and internal sub-assembly shock mount for maximum reliability.

Package includes:

One SCM900 Studio Condenser
One CM90 Small Diaphragm Condenser
Rugged Carrying Case

Nady SCM 900-CM 90 Studio Mic Package Features:

SCM 900:
Type: True condenser pressure-gradient microphone with 1" diaphragm and FET preamplifier
Polar pattern: Cardioid
Sensitivity: 12mV/Pa=-38dB (0dB=1V/Pa)
Frequency range: 30 to 16,000Hz
Low cut: 100Hz, -6dB
Recommended load impedance: 1,000 ohms
Max. SPL (1% THD @1000Hz): 125dB
Equivalent noise level to
IEC 268-4(A weighted): 20dB-A
S/N ratio re 1Pa: 76dB
Power requirement: +48VDC phantom power
Current consumption: <3mA
Connector: 3-pin XLR (gold-plated)
Mic cable: 3-pin XLR standard cable
(not supplied)
Size: Diameter: 2.0"
Length: 7.5"
Net weight: 17.8oz
CM90:
Type: True condenser pressure-gradient microphone with 0.79 inch(20mm) diaphragm and FET
Polar pattern: Cardioid
Open circuit sensitiity: 14mV/Pa=-37dBV (0dBV=1V/Pa)
Frequency range: 40 to 16000Hz
Rated output impedance: <200 Ohms
Recommend load Impedance: 1000 Ohms
Max. SPL (1% THD @1000Hz): 131dB
Equivalent noise level to DIN 45405(CCIR 468-2): 28DB
Max. SPL (1% THD @1000Hz): 131dB
Power requirement: +48VDC phantom power
Equivalent noise level to DIN 45405(CCIR 468-2): 28DB
IEC 268-4(A weighted): 19dB-A
S/N ratio re 1Pa: 75dB
Current consumption: <3mA
Ambient temperature range: 14 degrees F to 140 degrees F (-10 degrees C to +60 degrees C)
Relative humidity range: 90% (68 degrees F, 20 degrees C), 85% (140 degrees F, 60 degrees C)
Connector: 3-pin XLR (gold-plated)
Phasing: Positive voltage on pin 2 relative to pin 3
Mic cable: 3-pin XLR standard cable (not supplied)
Size: Diameter: 0.9", Length: 5.1"
Net weight: 5 oz.