JBL VP7212/64DP Powered 12" 2-way Integrated Loudspeaker System

Powered bi-amplified full-range loudspeaker with JBL DrivePack^® technology for portable
or installed use.

Optional input modules are DPAN and DPCN (CobraNet™ digital audio input) modules with HiQnet System Architect™ network control and monitoring.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet™ compatible; network control.

12-inch Differential Drive^® low-frequency driver for extended low-frequency output .

60° x 40°coverage.

Stylized and ergonomically designed powder-coated die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10 fittings

(optional detachable flying fittings and forged eye bolt kits available).

JBL VP7212/64DP Speakers Specifications:

Frequency Range	:	47 Hz to 20 kHz (-10 dB)
Frequency Response	:	60 Hz to 18 kHz ( ± 3 dB)
Coverage Pattern	:	60°x 40° rotatable waveguide
Directivity Factor (Q)	:	15.8
Directivity Index (DI)	:	12 dB
Maximum Peak Output¹	:	137 dB SPL 1m

Low Frequency Section

JBL 2262G, 381mm (12in) dia., 76mm (3in) Dual Coil neodymium Differential Drive^®, Direct Cooled

Bandpass Nominal Impedance

JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit

Bandpass Nominal Impedance

System:
DP2 Internal Amplification Output (at nominal load)	:	2200 Watts Peak, 1100 Watts Continuous
DP2 Output (Continuous IEC shaped pink noise into rated load impedance)	:	750LF/350HF Watts
DP2 Output Section	:	2-Channel, Class I
Audio Input connector	:	XLR with loop-through
Network controlconnector	:	Ethernet, RJ45
Signal Processing	:	DSP Based, resident in Input Module
System Management	:	DSP based limiters for mechanical and thermal protection
AC Power Operating Range	:	Auto Select 90-132VAC/216-264VAC, 50/60Hz
AC Line Voltage	:	50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
AC Input Connector	:	Neutrik PowerCon
AC Loop-thru	:	Neutrik PowerCon