|
JBL PRX535 3-Way 15" Powered Speaker Cabinet
The PRX535 offers a high level of
performance. By design, a 3-way
configuration, it is the most accurate in the
PRX500 Series. With a horn loaded midrange,
pattern control is maintained to a much lower
frequency resulting in exceptional clarity and
uniform sonic projection over the defined
coverage area. Ideally suited to applications
where the program material, live or prerecorded
has many subtle nuances that is
critical to the performance. As with all the
full-range PRX500 Series systems two EQ
selections can be used to optimize the system
for the program material and/or environment.
The input section also accommodates either
Line or Mic/Instrument level inputs.
The PRX535 is a self-powered, lightweight
3-way loudspeaker system capable of
delivering a very high level of performance,
both in SPL and sonic accuracy. The PRX535
is comprised of a 380 mm (15 in) 265F
Differential Drive® woofer, a 165 mm (6.5 in)
195H horn-loaded 90° by 50° mid-range and
a 2408H 37.5 mm (1.5 in) annular polymer
diaphragm, neodymium compression driver
mounted to a 90° by 50° horn, all driven by
a multi-channel Crown International Class-D
digital power amplifier. A propriety DSP chip
is at the core of a fully featured input section,
providing user selectable system EQ,
protection, input sensitivity selection, crossover
functionality, dynamic limiting and
discrete component optimization.
The enclosure is constructed of quality
plywood and coated in JBL’s rugged
DuraFlex™ finish. Durable polypropylene
end-caps add extra protection for the cabinet.
An integrated pole mount on the bottom endcap
enables easy deployment. The CNCmachined
steel grille wraps around the sides
of the enclosure so there are no protruding
lips on the front of the box to create
acoustical interference. The grille is also lined
with an acoustically transparent foam to provide additional driver protection.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch
provides extra flexibility, making it possible to connect literally any sound source without
using a mixer. Signal present and overload lights indicate the system status and assist in
setting the optimum level, via the level control knob.
Key Features:
Differential Drive® woofer
Horn loaded mid range for sonic accuracy
and enhanced pattern control
1.5" annual polymer diaphragm
compression driver
Class-D, Crown® digital amplifier:
lightweight, compact, multi channel,
heritage
DSP input section with crossover, dynamic
limiting, component optimization,
selectable system EQ
Professional XLR line and ¼"
Mic/Instrument inputs, with loop through
Illuminated logo for clear Power-On status
Integrated pole mount socket
DuraFlex™ coated plywood construction
Polypropylene end-caps enhance durability
Wrap around heavy duty steel grille
provides protection without obstructing
performance.
Large die-cast aluminum handle bar with a
fine tuned ergonomic rubber grip for
maximum comfort
Specifications:
|
Frequency Range |
: |
39 Hz – 20 kHz |
|
Frequency Response |
: |
46 Hz – 20 kHz |
|
Nominal Impedance |
: |
64 K Ohms (balanced), 32 K Ohms (unbalanced) |
|
Power Capacity |
: |
650 W continuous, 1300 W peak |
|
Rated Maximum SPL |
: |
134 dB SPL peak
|
|
Coverage Pattern |
: |
90° x 50° nominal
|
|
Dimensions (H x W x D) |
: |
1070 mm x 440 mm x 465 mm
(42 in x 17.25 in x 18.25 in) |
|
Weight |
: |
33.5 kg (74 lb) |
|
High Frequency Driver |
: |
1 x JBL 2408H, 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver |
|
Mid Frequency Driver |
: |
1x JBL 195H, 165 mm (6.5 in) woofer
|
|
Low Frequency Driver |
: |
1 x JBL 265F, 380 mm (15 in) Differential Drive® woofer |
|
