|
JBL EON15P-1 15 Inch Portable Powered Speaker System
Bi-Amplified, 130 watt Low Frequency, 50 watt High Frequency, 15" Differential Drive Transducer with Neodymium Magnet, 1.75" (Voice Coil) Titanium Diaphragm Compression Driver, Gray.
Application:
Live sound reinforcement, speech, vocals, and music playback in entertainment, A/V, and institutional venues – especially when ease of use, audio quality and portability are important factors.
Amplification and monitoring for electronic musical instruments.
Key Features:
15" Differential Drive® low-frequency driver with neodymium magnet for light weight and reduced distortion.
1" (throat diameter) JBL compression driver with 1.75" titanium diaphragm and ferrofluid cooling.
Internally Bi-amplified – 130 watts low frequency and 50 watts hi-frequency (bi-amplified) – actual power delivered to the drivers.
Balanced, Mic/Line switchable, XLR input.
Loop-through XLR output. “Daisy-chain” additional EON speakers.
90° x 60° (nominal) constant directivity horn.
Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat – no internal or external cooling fans are required.
Rugged, lightweight (47 lbs.), co-polymer enclosure.
Integral 35 mm pole mount receptacle with securing thumbscrew.
Multi-angle enclosure for front of house or stage monitor application.
Integral attachment points for optional JBL and third-party mounting brackets.
Specifications:
Freq. Range (-10 dB): 47 Hz - 18 kHz
Freq. Response (±3 dB): 65 Hz - 16 kHz
Horz. Coverage (-6 dB): 90° Nominal
Vert. Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 127 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in)
Net Weight: 21 kg (47 lbs)
LF Driver: Integral frame with 15" (380 mm) driver, neodymium magnet, 2" Differential Drive voice coil.
HF Driver: JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm.
Ferro-fluid cooled.
Amplifier Power LF: 130 watts @ low-frequency driver impedance, <.1% THD.
Amplifier Power HF: 50 watts @ high-frequency driver impedance, <.1% THD.
Input Sensitivity: -55 dBu to -2 dBu for rated output (Mic/Line switch in MIC position) +9 dBu to +26 dBu for rated output Mic/Line switch in LINE position)
Enclosure Material: Aluminum baffle, gray co-polymer enclosure and protective bezel
Audio Connectors:
Input XLR/F, balanced
Loop Out XLR/M, balanced
Crossover Freq.: 1.5 kHz.
AC Input: Switchable 115 - 230 VAC (±10%), 50 - 60 Hz.,
175 watts rating per UL, detachable IEC (male) power connector. | 
