|
JBL EON10-G2 Powered 10" Portable Speaker System - Active PA Loudspeaker
BUILT TO MOVE - BUILT TO PERFORM
Bi-Amplified, 125 watt Low-Frequency, 50 watt High-Frequency, 10" Differential Drive Woofer with Neodymium Magnet, 1" (Exit) Titanium Diaphragm Ferrofluid Cooled Compression Driver, Black with 'EON' Embossed Grille.
The new EON10 G2 compact powered speaker features a 10" woofer, increased power and a three input mini-mixer. The EON10 G2 is ideal for AV applications, smaller musical and spoken word performances and, when combined with the new EONSUB G2 powered subwoofer, provides a full range sound system for small and medium sized events.
The first generation EON10 was very popular, not only with musicians, but with hotels, meeting planners, AV companies and just about any application where portable compact sound reinforcement was needed. Its successor, EON10 G2 offers more power, more flexibility and a refined appearance that will make it even more appropriate for its many types of users.
The EON10 G2 shares the same appearance improvements with its larger companion EON15 G2, including new black exterior material and a mini-mixer with three inputs. An additional XLR output allows EON Speakers to be daisy-chained together. As with other EON G2 speakers, the EON10 G2 is kept cool, not by heatsinks or fans, but by JBL's Thermomaster Total Thermal Management System.
The EON10 G2 has more power than the first generation EON10, with 125 watts for low frequencies and 50 watts for the highs. The 10" Differential Drive low frequency driver uses a neodymium magnet for light weight and reduced distortion. The one-inch JBL 2412 compression driver for the high frequencies includes a titanium diaphragm and ferro-fluid cooling.
With its versatile cabinet design, the EON10 G2 can be used in several different ways. As a front of house speaker, the EON10 G2 can sit on a flat horizontal surface or be raised in the air using standard tripod speaker stands.
The cabinet has also been designed to let the EON10 G2 be snugly placed atop the EONSUB G2 for added volume and extended bandwidth. In addition, the angled back of the speaker allows its use as a vocal or instrument monitor on stage.
JBL EON10-G2 Features:
-
125W drives 10" woofer with neodymium magnet
-
50W drives 1" compression driver with titanium diaphragm and ferro-fluid cooling
-
Combines with EONSUB G2 powered Subwoofer for a full-range small to medium PA system
-
3-input mini mixer for flexible speaker configuration
-
Additional XLR output for daisy-chaining multiple EON speakers
-
Flexible mounting and positioning for use as FOH or stage monitor use
JBL EON10-G2 Specifications:
Freq. Range (-10 dB): 65 Hz - 18 kHz
Freq. Response (±3 dB): 90 Hz - 16 kHz
Horiz. Coverage (-6 dB): 90ø nominal
Vert. Coverage (-6 dB): 60ø nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 493 mm x 356 mm x 307 mm (19.4 in x 14.0 in x 12.1 in.)
Net Weight: 10.4 kg (23 lbs.)
LF Driver: Integral frame with one 10"(254 mm) driver, dual neodymium magnet, 1.5"Differential-Drive© voice coil.
HF Driver: JBL2412 1"(throat diameter) compression driver with titanium diaphragm. Ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity: -48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position) -6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors
Input 1: XLR/F, balanced Audio Connectors Input 2 & 3: Single TRS 1/4"Phone Crossover Freq: 2.7 kHz Loop/Mix Out: XLR/M, balanced.
AC Input: 110 - 230 VAC, 50 - 60 Hz, 100 watts rating per UL, detachable IEC power cable
JBL EON10 G2 Powered PA Speaker Cabinet Features:
125W drives 10" woofer with neodymium magnet
50W drives 1" compression driver with titanium diaphragm and ferro-fluid cooling
Combines with EONSUB G2 powered Subwoofer for a full-range small to medium PA system
3-input mini mixer for flexible speaker configuration
Additional XLR output for daisy-chaining multiple EON speakers
Flexible mounting and positioning for use as FOH or stage monitor use
| 
