This snake is a Stage Box-to-Fan with microphone inputs and return (Except 6x0) Stage Box is 16 Gauge steel with raised edges and integral handle All connectors are metal Neutrik Microphone connectors at fan (mixer end) are all metal Neutrik XLR Male Microphone connectors at Stage Box are all metal Neutrik XLR Female Dual Returns on Stage Box are both XLR Male and TRS, wired in Parallel Returns at fan (mixer end) can be either metal Neutrik XLR-F or TRS Each channel is 3-conductor, 24 gauge Meets NEC Code for permanent installation Each fan-end channel has color-coded Tech Flex wrap Heavy Wire mesh strain relief on both the stage box and fan The overall outer jacket is Matte PVC Select the number of microphone inputs below:

CL-2 Multi-pair Snake Cable Specifications:
Stranding = 7/32 Awg
Cap. Between Cond. = 25 pf/ft. @ 1kHz
Cond. to Shield = 45 pf/ft. @ 1kHz
Characteristic Impedance = 60 ohms nominal
Resistance @ 20 C = 24.5 ohms/1000 ft.

LIFETIME WARRANTY - The Best in the Business!
Rapco-Horizon warranties all pre-made cables and snake products to be free from material and workmanship defects for life. If at any time a Horizon cable or snake product fails due to material or workmanship defect, simply return the product, prepaid freight to the Horizon address listed on the warranty card, and Horizon will repair or replace any product covered by this warranty at its option and return to you prepaid freight. For a copy of the actual warranty, see the reverse side of any Horizon cable product label, or contact us.