Crown XLS 802 Stereo Power Amplifier Stereo Mode: 1050 Watts @2 ohms, 800 Watts @4 ohms, 500 Watts @8 ohms Bridged Mono: 1,600 Watts @8 ohms Maximum average power in watts at 1 kHz with 0.5% THD. | Minimum Guaranteed Power | XLS 202 | XLS 402 | XLS 602 | XLS 802 | XLS 5000 | | per channel, both channels driven, 1 kHz with 0.5% THD | | Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms | -- 300W
200W
600W -- | -- 450W
300W
900W -- | -- 600W
380W
1200W -- | -- 800W
500W
1600W -- | 2500W 1800W 1100W 3600W 5000W | Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and choice of 1/4", XLR, and barrier strip jacks; all in a rugged steel chassis designed to handle serious road use. Features: • | Efficient, cost-effective power amplifier with 500W per channel at 8 ohms | • | Rugged, all-steel chassis; simple, easily operated design | • | Extensive amplifier protection circuitry includes output current limiting, DC protection, onboard circuit breaker and proprietary thermal protection for unit's transformers | • | Forced-air fan cooling prevents thermal buildup | • | High quality, electronically balanced XLR inputs | • | Speakon and touch-proof 5-way binding post outputs | • | Large front panel LED indicator lights | • | Precise, detented rotary level controls for each channel | Crown XLS-802D Amplifier Specifications: | Power Rating | 800W @ 4Ω Stereo (per channel)
500W @ 8Ω Stereo (per channel)
1600W @ 8Ω Bridged-Mono
1000W @ 16Ω Bridged-Mono | | | | Damping Factor | >200 from 10 Hz - 400 Hz (@8 Ohms) | | | | Input Sensitivity | 1.25V @4 Ohms | | | | Input Impedance | 20 kOhms(nominally balanced)
10 kOhms(nominally unbalanced) | | | | Gain | 31 dB (at maximum output) | | | | Frequency Response | 22 Hz - 20 kHz +0dB/-0.8 dB (@ 1W) | | | | Signal-to-Noise Ratio | >98 dB (A-weighted, below rated power)
>93 dB (no weighting, below rated power) | | | | Total Harmonic Distortion (THD) | <0.5% | | | | Input Connections | 2 x 3-Pin XLR Female | | | | Output Connectors | 2 x 4-Pole Speakon Connectors
2 x Pair 5-Way Binding Posts | | | | Controls Front Panel | 2 x Rotary Level Controls
1 x Power Switch | | | | Controls (Rear) | 1 x Dual/Bridged Mono Selector Switch
1 x Circuit Breaker Switch | | | | Indicators | 2 x Red LED Clip Indicators
1 x Blue LED Power On Indicator
2 x Red LED Fault/Protect Mode Indicator
2 x Green LED Signal Presence Indicators | | | | Cooling | Internal heat sinks with forced air cooling, front-to-back ventilation | | | | Power Consumption | 120VAC:
1/8 Power Pink Noise:
6.1 Amps (8 Ohms Stereo/16 Ohms bridged)
11 Amps (4 Ohms stereo/8 Ohms bridged)
1/3 Power Pink Noise:
9.3 Amps (8 Ohms Stereo/16 Ohms bridged)
17 Amps (4 Ohms Stereo/8 Ohms bridged)
230VAC:
1/8 Power Pink Noise:
3.1 Amps (8 Ohms Stereo/16 Ohms bridged)
5.5 Amps (4 Ohms stereo/8 Ohms bridged)
1/3 Power Pink Noise:
4.7 Amps (8 Ohms Stereo/16 Ohms bridged)
8.5 Amps (4 Ohms Stereo/8 Ohms bridged) | | | | Power Requirements | 120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz | | | | Dimensions | 19 x 3.5 x 15.2" (482.6 x 89 x 386mm); 2U | | | | Weight | 35.5 lbs (16.1 kg) | | | | Specialties | Forced Air Fan Cooling
Extensive Protection Circuitry | |
