Crown XLS 602 Stereo Power Amplifier
Stereo Mode: 840 Watts @2 ohms, 600 Watts @4 ohms, 380 Watts @8 ohms
Bridged Mono: 1,200 Watts @8 ohms
Maximum average power in watts at 1 kHz with 0.5% THD.
|
Minimum Guaranteed Power |
XLS 202 |
XLS 402 |
XLS 602 |
XLS 802 |
| per channel, both channels driven, 1 kHz with 0.5% THD |
|
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms |
--
300W
200W
600W
-- |
--
450W
300W
900W
-- |
--
600W
380W
1200W
-- |
--
800W
500W
1600W
-- |
Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and choice of 1/4", XLR, and barrier strip jacks; all in a rugged steel chassis designed to handle serious road use.
Crown XLS 602 Amplifier Features:
 |
Efficient, cost-effective power amplifier with 380 Watts per channel at 8 Ohms |
|
Rugged, all-steel chassis; simple, easily operated design |
|
Extensive amplifier protection circuitry includes output current limiting, DC protection, onboard circuit breaker and proprietary thermal protection for unit's transformers |
|
Forced-air fan cooling prevents thermal buildup |
|
High quality, electronically balanced XLR inputs |
|
Speakon and touch-proof 5-way binding post outputs |
|
Large front panel LED indicator lights |
|
Precise, detented rotary level controls for each channel |
Specifications:
Power Rating |
600W @ 4Ω Stereo (per channel)
380W @ 8Ω Stereo (per channel)
1200W @ 8Ω Bridged-Mono
760W @ 16Ω Bridged-Mono |
|
|
Damping Factor |
>200 from 10 Hz - 400 Hz (@8 Ohms) |
|
|
Input Sensitivity |
1.25V @4 Ohms |
|
Input Impedance |
20 kOhms (nominally balanced)
10 kOhms (nominally unbalanced) |
|
|
Gain |
31 dB (at maximum output) |
|
|
|
Frequency Response |
22 Hz - 20 kHz +0dB/-0.8 dB (@1 Watt) |
|
Signal-to-Noise Ratio |
>98 dB (A-weighted, below rated power)
>93 dB (no weighting, below rated power) |
|
|
Total Harmonic Distortion (THD) |
<0.5% |
|
|
Input Connections |
2 x 3-Pin XLR Female |
|
|
|
Output Connectors |
2 x 4-Pole Speakon Connectors
2 x Pair 5-Way Binding Posts |
|
|
|
Controls Front Panel |
2 x Rotary Level Controls
1 x Power Switch |
|
|
|
Controls (Rear) |
1 x Dual/Bridged Mono Selector Switch
1 x Circuit Breaker Switch |
|
|
|
Indicators |
2 x Red LED Clip Indicators
1 x Blue LED Power On Indicator
2 x Red LED Fault/Protect Mode Indicator
2 x Green LED Signal Presence Indicators |
|
|
|
Cooling |
Internal heat sinks with forced air cooling, front-to-back ventilation |
|
|
|
Power Consumption |
120VAC:
1/8 Power Pink Noise:
5.1 Amps (8 Ohms Stereo/16 Ohms bridged)
8.1 Amps (4 Ohms stereo/8 Ohms bridged)
1/3 Power Pink Noise:
7.7 Amps (8 Ohms Stereo/16 Ohms bridged)
13 Amps (4 Ohms Stereo/8 Ohms bridged)
230VAC:
1/8 Power Pink Noise:
2.6 Amps (8 Ohms Stereo/16 Ohms bridged)
4.1 Amps (4 Ohms stereo/8 Ohms bridged)
1/3 Power Pink Noise:
3.9 Amps (8 Ohms Stereo/16 Ohms bridged)
6.5 Amps (4 Ohms Stereo/8 Ohms bridged) |
|
|
|
Power Requirements |
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz |
|
|
|
Dimensions |
19 x 3.5 x 15.2" (482.6 x 89 x 386mm); 2U |
|
|
|
Weight |
29 lbs (13.2 kg) |
|
|
|
Specialties |
Forced Air Fan Cooling
Extensive Protection Circuitry | |
