Crown CTs 2000 Power Amplifier 2000 WattsÿBuilding on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.The Crown CTs-2000 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry.ÿFeatures:- High power density in a 2RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8ohm) operation per channel
- 100V direct outputs
- Legendary Crown class-I (BCA) and AB+B outputtopologies offer the best in amplifier reliability
- Comprehensive array of indicators provide accuratediagnostics
- Fully PIP2-compatible
- HiQnet compatible
Power Output: - Dual mode, 2, 4 or 8ÿohms: 1000W
- Dual mode,ÿ16 ohms: 625W
- Dual mode, 70V or 100V: 1000W
- Bridge mode: 2000W
Specifications: - Frequency Response (at 1 watt, 20Hz-20kHz): +/-0.25dB
- Signal to Noise Ratio below rated power (20Hz to20kHz): 105dB A-weighted
- Total Harmonic Distortion (THD) at full rated power,from 20Hz to 20kHz: <0.35%
- Damping Factor: 10Hz to 100Hz: >3000
- Crosstalk (below rated power, 20Hz to 1kHz): >80dB
- Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB
- DC Output Offset: <2mV
- Input Impedance (nominal): 10 kilohms balanced, 5kilohms unbalanced
- Maximum Input Level: +20dBu before input compression,+32dBu absolute maximum
- Load Impedance (safe with all types of loads):Stereo: 2/4/8/16 ohms, 70V, 100V. Bridge Mono: 4/8/16 ohms, 140V, 200V
- Voltage Gain (at maximum level setting): 8/4 ohmoperation, 1.4V sensitivity: 63.9:1 (36dB)
- Cooling: Continuously variable speed forced air,front-to-back airflow
- Dimensions (W x H x D): 19" x 3.5" x 14.25"
- Weight: 27 lbs (net); 32 lbs (shipping)
|
|
