Crown CTs 2000 Lite Power AmplifierÿBuilding on the foundation of the Com-Tech Series, Crown's CTS 2000 Lite offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTS 2000 amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements. The Crown CTs-2000 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. This version of the CTs 2000 includes the PIP-Lite Accessory
PIP-Lite: Amplifier accessory input module offering basic plus Smart Amp IQ feature sets for remote control and monitoring. TCP/IQ connects to an IQ System via 100 Mb Ethernet. Features:- High power density in a 2RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8ohm) operation per channel
- 100V direct outputs
- Legendary Crown class-I (BCA) and AB+B outputtopologies offer the best in amplifier reliability
- Comprehensive array of indicators provide accuratediagnostics
- Fully PIP2-compatible
- HiQnet compatible
Power Output: - Dual mode, 2, 4 or 8ÿohms: 1000W
- Dual mode,ÿ16 ohms: 625W
- Dual mode, 70V or 100V: 1000W
- Bridge mode: 2000W
Specifications:Frequency Response (at 1 watt, 20Hz - 20 kHz)
ñ0.25 dB
Phase Response (at 1 watt, 10Hz - 20 kHz)
ñ20ø
Signal to Noise Ratio below rated power (20 Hz to 20 kHz)
<-102 dB A-weighted
Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz
<0.05%
Damping Factor 10 Hz to 400 Hz
>3000
Crosstalk (below rated power, 20 Hz to 1 kHz)
>80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)
>50 dB
DC Output Offset (Shorted input)
<10 mV
Input Impedance nominally balanced, nominally unbalanced
20 k ohms, 10 k ohms
Maximum Input Level (before input compression)
+20 dBu
Load Impedance (Note: Safe with all types of loads)
-Stereo 2, 4, 8, 5 (70V), and 10 ohms (100V
-Bridge Mono 4, 8, 16, 10 (140V), and 20 ohms (200V)
Voltage Gain (at maximum level setting), 1.4V sensitivity
-4/8 Ohm Operation
--41:1 (32 dB)
-70V Operation
--39:1 (32 dB)
-100V Operation
--39:1 (32 dB)
Required AC Mains
120V 60 Hz, 220/230/240V/50 Hz
Power Draw at Idle (120VAC mains)
-All channels in 4/8 ohm mode
--24W (Standby Mode)
-All channels in 70V mode
--24W (Standby Mode)
Cooling
Variable-speed forced air
Dimensions
-Width, 19 in. (48.3 cm.)
-Height, 3.5 in. (8.9 cm.)
-Depth 14 in. (35.6 cm.)
Net Weight
26 lb (11.8 kg)
ÿ
|
|
