|
Aviom AN-16/o v.4 16 Channel Microphone or Line Level Output Module with DB25 Connectors
The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems.
Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters.
Sixteen balanced outputs are provided on the rear panel via DB25 multi-pin connectors.
The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.
Aviom AN-16/o v.4 Features
- 16 balanced mic- or line-level outputs
- Four-position output level switch per channel pair
- +24, +18, and +4dBu line-level, or mic-level outputs
- Converts A-Net digital stream to 16 analog audio channels
- 48kHz, 24-bit D/A converters
- Unlimited splits and digital copies
- Optional AN-16SBR System Bridge combines up to 4 A-Net streams onto one cable
- Cat-5e cable runs up to 500 feet (150 meters) between devices
Aviom AN-16/o v.4 Specifications
| Audio Outputs |
16 channels, balanced |
| Outputs |
DB25 multipin connectors (2); Tascam® analog audio pinout |
| Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu |
| D/A Conversion |
48kHz sample rate, 24 bit |
| Frequency Response |
4Hz-22kHz |
| A-Net Input/Output |
one EtherCon Category 5 (RJ45 connector) |
| A-Net Expansion |
one EtherCon Category 5 (RJ45 connector) |
| Output Level Settings |
Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic |
| Channel LED Indicators |
Signal Present and Clip, per channel |
| Metering |
LEDs; green: Signal Present; red: Clip; per channel |
| Maximum Output Level |
+24dBu |
| Output Impedance |
226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic) |
| Freq. Response |
4Hz-22kHz +0.2dB/-3dB |
| THD +N |
< 0.004% |
| Crosstalk |
-90dB |
| Bit Error Rate (BER) |
10(-12) |
| Signal to Noise (unweighted) |
92dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o v.4 Output Module |
| Digital Connections |
A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
Neutrik EtherCon connectors |
| A-Net Pro16 |
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
uses unshielded Cat-5e UTP (or better) cable |
| Latency |
<0.620 msec (measured from analog input to analog output) |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
24 VDC, 0.5 amp
2 mm |
| Power |
24 VDC, 500mA |
| Dimensions |
19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high |
| Weight |
6.8 lbs. (3.08 kg) |
| Options |
AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable | |
