PROFESSIONAL SOUND SYSTEMS AND ACCESSORIES

HOME

CONTACT US

TOLL FREE: 877- 802- 0416

Acceptance Mark

GOD BLESS AND PROTECT OUR TROOPS

No Sales Tax Except California

Free GROUND shipping on orders over $97.00, except to Hawaii & Canada and Heavier Items

ACCESSORIES
ADAPTORS
AMPLIFIERS
ASSISTED LISTENING
AUDIO SNAKES
CLOSEOUTS
CABLES
CABLES, BULK
CASES-RACKS-BAGS
CD-DVD HIGH SPEED DUPLICATORS
CONNECTORS
DISCONTINUED PRODUCTS
FLOOR BOXES - STAGE POCKETS
HEADPHONES
HEADPHONE AMPS AND SPEAKER MANAGEMENT
IN-EAR-MONITOR SYSTEMS AND COMPONENTS
INTERFACES
MICROPHONES
MICROPHONE ACCESSORIES
MIXERS-DIGITAL
MIXERS-POWERED
MIXERS-UNPOWERED-ANALOG
RACK MOUNT
RACKS-CASES-BAGS
SHIPPING
SIGNAL PROCESSING
SOUND SYSTEMS
SPEAKERS
SPEAKER SNAKE ASSEMBLIES
STAGE POCKETS - FLOOR BOXES
STAGE SNAKES
STANDS - STAND ACCESSORIES
WALL PLATES - STUD BOXES

Authorize.Net Merchant - Click to Verify Credit Card Processing
Home > IN-EAR-MONITOR SYSTEMS AND COMPONENTS > AVIOM
Aviom AN-16/i-M 16 Channel Mic / Line Level Input Module
Aviom AN-16/i-M 16 Channel Mic / Line Level Input Module
Price
Retail Price: $2,725.00
Your Savings: $205.00
Your Price:
$2,520.00
Quantity
Description
Aviom AN-16/i-M 16 Channel Mic / Line Level Input Module
  • 16 mic/line analog inputs
  • Passive split, plus balanced inserts on each channel
  • High quality set-and-forget mic preamps
The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with sixteen high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.
 
The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs.

Aviom AN-16/i-M Technical Specifications

Audio Inputs 16, balanced mic- or line-level, XLR combo connector
XLR Input
(mic/line)
Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
TRS Line Inputs, &
Send/Return
Tip: Audio +; Ring: Audio -; Sleeve: Ground
Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
Direct coupled passive throughput
Insert Send Impedance balanced; Nominal level: 0dBu; Peak
Level (A/D clip point): +14dBu
The Insert Send connector is a line output in the signal path post gain, post filter, and post phase controls.
Insert Return TRS balanced; Nominal level: 0dBu; Peak Level
(A/D clip point): +14dBu
The Insert Return connector is a line input to the signal path that is pre A/D conversion.
Analog to Digital Conversion 48kHz sample rate, 24 bit
Operating Level +4dBu
Frequency Response 4Hz-22kHz
A-Net Output One Category 5 (RJ45 connector)
A-Net Expansion One Category 5 (RJ45 connector)
Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB
Channel LED Indicators Signal Present and Clip, per channel
Line Inputs Impedance: 48k ohms
Metering LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
Maximum Input Level Mic: +14dBu; Line: +28dBu
Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms;
Insert Return: 39k ohms
A/D Freq. Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured
from Mic or Line in)
-3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Mic or Line in)
THD +N < 0.003%
Crosstalk -90dB
Bit Error Rate (BER) 10(-12)
Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point) Send jack: -113dB (Gain = minimum)
EIN (Equivalent Input Noise) -128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
CMRR (Common Mode Rejection Ratio) 80dB @
120Hz (Gain = +60dB)
Low Cut Filter -3dB @ 85Hz, -18 dB per octave
Phantom Power +48 volts, per channel, switch with LED
Digital Outputs A-Net: 2 (Main and Aux); A-Net Expansion: 1
Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable uses unshielded Cat-5e UTP (or better) cable
Latency <0.880 msec (measured from analog input to analog output)
Power Supply Internal, universal switching type; IEC jack
Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
Dimensions 19" x 9.25" (482.6 x 234.95 mm); 3U high
Weight 12 lb(5.44 kg)
Options SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable

Email this page to a friend

Contents copyrighted 2005. Registered trademark. All Rights Reserved.

New World Pro Audio accepts no liability or responsibility for incorrect prices, spelling or manufacturers' specifications.

Prices subject to change without notice.

Please send us any problems you might encounter with this web site: CLICK HERE

Copyright NEW WORLD PRO AUDIO. All Rights Reserved. eCommerce Software by 3dcart.