|
audio-technica ATW2110a-Pro8HE UHF Wireless Headworn (Headset) Microphone System | 
| Ideal for drummers and other musicians who require a sturdy, reliable headworn microphone -
Serious advances in affordable professional wireless -
Clear sound quality and rock-solid, dependable performance -
Automatic frequency scanning -
10 compatible user-switchable channels in one of two UHF frequency ranges -
Antenna power available for powered antennas & other in-line RF devices -
True Diversity operation selects the better signal from the two receiver sections -
Tone Lock™ tone squelch system fights interference | Includes: Audio-Technica’s second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features include two available frequency bands and switchable antenna power. Also new to the 2000 Series, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a UniPak® transmitters in any combination.
Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock™ squelch plus an easy-to-read LCD information display. Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear
Switchable transmitter power output with high and low settings offered
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
ATW-T220a Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
New charger (ATW-CHG2 ) available for ATW-T220a & ATW-T210a transmitters audio-technica ATW2110a-PRO8HE OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies UHF
Band D: 656.125 to 678.500 MHz
Band I : 487.125 to 506.500 MHz
Number of Channels: 10 total
Modulation Mode: FM
Maximum Deviation ±40 kHz
Dynamic Range > 110 dB (A-weighted), typical
Total Harmonic Distortion < 1% (at 1 kHz, ±20 kHz deviation)
Operating Range 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range 5º C to 45º C,41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response 100 Hz to 15 kHz (+1 dB, -3 dB)
audio-technica ATW-R2100a RECEIVER SPECIFICATIONS
Receiving System True diversity Image Rejection 60 dB nominal, 55 dB minimum RF Sensitivity 20 dBuV at 60 dB S/N ratio (50 ohms termination) Antenna Input BNC-type, 50 ohms Bias voltage 12V DC, 60 mA, each Power Requirements 12-18V DC, 500 mA Dimensions 210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H Not including BNC connectors or feet. Net Weight 1.0 kg (35.3 oz), without accessories Maximum Output Level: XLR, balanced: +9 dBV ¼" (6.3 mm), unbalanced: +4 dBV Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB
Accessories Included Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters audio-technica ATW-T210a BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms Spurious Emissions Following federal and national regulations Input Connections Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V Batteries: Two 1.5V AA, not included Battery Life High: 7 hours (alkaline) Low: 9 hours (alkaline) Depending on battery type and use pattern. Dimensions: 66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H Net Weight: 81 g (2.9 oz), without batteries audio-technica PRO8HEcW Headworn Hypercardioid Dynamic Microphone
Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO 8HEx is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality vocal pickup with hands-free operation, the PRO 8HEcW features a pivot-mounted flexible mic boom that descends from either the left or right side. 55" cable terminated with locking 4-pin connector for A-T UniPak™ body pack transmitters Professional-quality vocal pickup with hands-free operation Hi-ENERGY neodymium element for crisp sound reproduction Low-visibility headband provides stable, comfortable fit Pivot-mounted flexible mic boom descends from left or right side audio-technica PRO8HEcW Headset Microphone Specifications
Element: Neodymium
Impedance: Dynamic 600 ohms
Polar Pattern: Hypercardioid
Weight: 2.1 oz
Frequency Response: 200 - 18,000 Hz
Output Connector: XLRM-type on cable
Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
Accessories Furnished: AT8139L large windscreen;
AT8139S small windscreen; AT8439 clothing clip
55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems |
