|
AUDIO-TECHNICA ATW-R250 VHF Freeway 200 SERIES WIRELESS RECEIVER ONLY Includes: NOTE: You must have a 200 Series Transmitter on the same frequency for this receiver to function. Advanced dipole antenna system. Available in three traveling frequencies. Removable docking power supply inserts into back of receiver. Adjustable squelch control.
Audio-Technicas Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.
- Easy operation and clear, natural sound quality
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, Ό output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
OVERALL SYSTEM SPECIFICATIONS | | | | Operating Frequency | VHF high band, 169 MHz to 172 MHz | | | | Number of Channels | Fixed channel | | | | Frequency Stability | ±0.005% | | | | Modulation Mode | FM | | | | Maximum Deviation | ±15 kHz | | | | Operating Range | 200' typical | | | | Operating Temperature Range | 40° F (4° C) to 110° F (43° C) | | | | Frequency Response | 80 Hz to 13 kHz | | | |
RECEIVER SPECIFICATIONS | | | | Receiving System | Non-diversity, single-channel, dual antenna system | | | | Image Rejection | 50 dB minimum | | | | Signal-to-noise Ratio | 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz | | | | Total Harmonic Distortion | <=1% (10 kHz deviation at 1 kHz) | | | | Sensitivity | 20 dB΅V for 60 dB S/N (IEC-weighted) | | | | Audio Output | 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) | | | | Output Connector | 1/4" TS ("mono") phone jack | | | | Power Supply | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply | | | | Dimensions | 7.48" W x 1.65" H x 5.12" D | | | | Net Weight | 11.0 oz (311 g) | | | | Accessory Included | Power supply | | | |
|
|
|
