audio-technica ATM350 Cardioid Condenser Clip-On Instrument Microphone Supplied with Audio-Technicas versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback. audio-technica ATM350 Clip-On Instrument Microphone Features: Low-profile design for minimum visibility
UniMount® clip permits accurate positioning, provides shock resistance and protects element
Unique violin mount permits unobtrusive placement of microphone between the instruments bridge and tailpiece
Crisp, clear, well-balanced response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Corrosion-resistant contacts from gold-plated XLRM-type connector
Rugged, all-metal design and construction for years of trouble-free use audio-technica ATM350 Clip-On Instrument Microphone Specifications: | ELEMENT | Fixed-charge back plate permanently polarized condenser | | | | POLAR PATTERN | Cardioid | | | | FREQUENCY RESPONSE | 40-20,000 Hz | | | | LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave | | | | OPEN CIRCUIT SENSITIVITY | 49 dB (3.5 mV) re 1V at 1 Pa | | | | IMPEDANCE | 50 ohms | | | | MAXIMUM INPUT SOUND LEVEL | 149 dB SPL, 1 kHz at 1% T.H.D. | | | | DYNAMIC RANGE (typical) | 122 dB, 1 kHz at Max SPL | | | | SIGNAL-TO-NOISE RATIO | 67 dB, 1 kHz at 1 Pa | | | | PHANTOM POWER REQUIREMENTS | 11-52V DC, 3.5 mA typical | | | | SWITCH | Flat, roll-off | | | | WEIGHT (MICROPHONE) | 14.5 g (0.5 oz) | | | | WEIGHT (POWER MODULE) | 81.2 g (2.9 oz) | | | | DIMENSIONS (MICROPHONE) | 37.8 mm (1.49") long,
12.2 mm (0.48") diameter | | | | DIMENSIONS (POWER MODULE) | 92.9 mm (3.66") long,
18.9 mm (0.74") diameter | | | | OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type | | | | CABLE | 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector | | | | ACCESSORIES FURNISHED | AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch | | | | AUDIO-TECHNICA CASE STYLE | M36 |   |
|
