|
audio-technica AT8035 Line + Gradient Shotgun Condenser Microphone The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power. Designed for video production and broadcast (ENG/EFP) audio acquisition Length is well-suited for ENG, outdoor recording and other specialized uses Provides the narrow acceptance angle desirable for long-distance sound pickup Excellent sound rejection from the sides and rear of mic Switchable low-frequency roll-off Operates on battery or phantom power RoHS compliantfree from all substances specified in the EU directive on hazardous substance | audio-technica AT8035 MICROPHONE SPECIFICATIONS | | ELEMENT | Fixed-charge back plate, permanently polarized condenser | | POLAR PATTERN | Line + gradient | | FREQUENCY RESPONSE | 40-20,000 Hz | | LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave | | OPEN CIRCUIT SENSITIVITY | Phantom: 38 dB (12.5 mV) re 1V at 1 Pa
Battery: 39 dB (11.2 mV) re 1V at 1 Pa | | IMPEDANCE | Phantom: 250 ohms
Battery: 300 ohms | | MAXIMUM INPUT SOUND LEVEL | Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 120 dB SPL, 1 kHz at 1% T.H.D. | | DYNAMIC RANGE (typical) | Phantom: 110 dB, 1 kHz at Max SPL
Battery: 98 dB, 1 kHz at Max SPL | | SIGNAL-TO-NOISE RATIO | 72 dB, 1 kHz at 1 Pa | | PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical | | BATTERY TYPE | 1.5V AA/UM3 | | BATTERY CURRENT / LIFE | 0.4 mA / 1200 hours typical
(alkaline) | | SWITCH | Flat, roll-off | | WEIGHT | 170 g (6.0 oz) | | DIMENSIONS | 369.0 mm (14.53") long,
21.0 mm (0.83") diameter | | OUTPUT CONNECTOR | Integral 3-pin XLRM-type | | ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case | | AUDIO-TECHNICA CASE STYLE | SG1 | |
