audio-technica AT4033/CL Cardioid Studio Condenser Microphone Includes FREE POMT Pop Filter!!!  The classic edition of the legendary AT4033 microphone, the side-address AT4033/CL offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A studio classic and bluegrass favorite which has a strong up-front presence and characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033/CLs 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. audio-technicaAT4033/CL Microphone Features Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use Floating-construction capsule assembly provides isolation from noise and vibration Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Custom shock mount provides superior isolation audio-technica AT4033/CL Microphone Specifications: ELEMENT | Fixed-charge back plate, permanently polarized condenser | | POLAR PATTERN | Cardioid | | FREQUENCY RESPONSE | 30-20,000 Hz | | LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave | | OPEN CIRCUIT SENSITIVITY | -32 dB (25.1 mV) re 1V at 1 Pa | | IMPEDANCE | 100 ohms | | MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal) | | NOISE | 17 dB SPL | | DYNAMIC RANGE (typical) | 128 dB, 1 kHz at Max SPL | | SIGNAL-TO-NOISE RATIO | 77 dB, 1 kHz at 1 Pa | | PHANTOM POWER REQUIREMENTS | 48V DC, 3.2 mA typical | | SWITCHES | Flat, roll-off;
10 dB pad (nominal) | | WEIGHT | 13.4 oz (380 g) | | DIMENSIONS | 6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter | | OUTPUT CONNECTOR | Integral 3-pin XLRM-type | | ACCESSORIES FURNISHED | AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case | | | | AUDIO-TECHNICA CASE STYLE | R1 |   |
|
