 
|
 System and Components To order products, go to the bottom of this page
AVIOM Systems and Components - In-Ear Monitors, Digital Snakes |
We do AVIOM "Right"- Let us help design YOUR ideal system
|
|
|
|
The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
The stereo output from the A-16II can be used to drive wired or wireless in-ears, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's digital interface cards for Yamaha® and DiGiCo® digital mixing consoles. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.
|
|
|
|
|
With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, eliminating the need to connect a power supply at each Personal Mixer. Any combination of powered and unpowered connections is possible; simply connect external power supplies to the A-16D on a per-channel basis as needed.
The A-16D is also a cost-effective way to refresh an A-Net signal for long runs in excess of 500ft/150m, to provide a redundant cable path in a digital snake or audio distribution system, and to split an A-Net signal to multiple output locations. There is no limit to the number of A-Net Distributors that can be used in a single system.
|
|
|
|
|
Each A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.
The 2U A-16D Pro eliminates the need to daisy chain Personal Mixers, and simplifies set-up by eliminating the need to connect a power supply to each mixer. Inside the A-16D Pro is Aviom's unique power sub-system design, which requires no external power supplies and which virtually eliminates the possibility of introducing hum or ground loops. The A-16D Pro can also be used as a central hub in an audio distribution system or snake, providing outputs to multiple locations or redundant outputs to a single location.
|
|
|
|
|
The A-16R Personal Mixer is a rack-mountable version of the A-16II. The A-16R includes additional audio I/O options designed for seamlessly connecting to wireless IEM transmitters and power amplifiers.
Designed specifically for users of wireless in-ear systems and unpowered floor wedges, the A-16R couples all the mixing features of the A-16II Personal Mixer with additional connectivity options. Balanced outputs on the rear panel (with both XLR and 1/4" jacks) and stereo balanced insert points simplify audio connections to external processors, amps, or transmitters. A front-panel headphone jack is also provided. The rear-panel stereo Mix In jacks allows a local analog audio source, such as a click track or program material, to be added to the mix.
|
|
|
|
|
The A-16CS is a remote controller for the A-16R Personal Mixer.
The A-16CS Control Surface allows the A-16R to be mounted in a rack with power amps, wireless transmitters, effects, etc., while still allowing a performer to have complete control over mix functions and presets. The user interface is similar to that of the A-16II.
Each A-16CS can control one A-16R, connected by a single Cat-5 cable of up to 200'/ 60m. Using the A-16R and A-16CS simplifies audio connections and provides two control points for a given mix.
|
|
|
|
|
The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio Thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.
Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console—any combination of channel inserts, direct outs, submixes, auxes, or groups—is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer or A-Net Distributor.
Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house.
|
|
|
|
|
The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with sixteen high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.
The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs.
|
|
|
|
Now with DB25 Connectors |
The new AN-16/o provides sixteen balanced mic- or line-level analog outputs, with switchable output levels per channel pair. Audio outputs feature secure DB25 multipin connectors. With both mic- and line-level outputs available, connecting to a console is simpler and more flexible.
The AN-16/o can be used both on stage and at front of house to provide outputs to consoles, as well as to amplifiers and speaker processors. Adding a split for recording or broadcast is as quick as running a Cat-5e cable to the additional locations and connecting additional AN-16/o modules as needed. Any number of AN-16/o Output Modules can be connected in a system, providing unlimited lossless digital splitting of an audio stream.
|
|
|
|
|
The AN-16SBR System Bridge is designed to be used with Pro16 Series products when digital snake and audio distribution systems larger than 32 channels are required. One AN-16SBR is used at each end of every 48- or 64-channel run.
At each end of a main run, one AN-16SBR is used to combine or separate up to four 16-channel A-Net streams onto a single Cat-5 cable. The combined Bridge output carries up to 64 channels. All network connections feature heavy-duty locking Neutrik EtherCon connectors.
The AN-16SBR supports the following configurations: 64x0, 48X16, 32x32 or smaller. All Pro16 Series products are compatible with the AN-16SBR. |
LIST of ALL PRODUCTS and ACCESSORIES |
|
|
