|
AKG Perception 420 Large Diaphragm True Condenser Multi-pattern Microphone A/B, X/Y, and M/S stereo recording
Ambience recording
Grand piano, woodwind and brass instruments
Percussions
Drums
Classical music recording
Studio applications - Back-to-back large-diaphragm multi-pattern transducer
- True condenser technology
- High sensitivity and 155 dB maximum SPL capability
- Switchable 20 dB pre-attenuation pad
- Switchable bass cut filter
- Legendary, pristine AKG sound quality
- Complete with spider-type shock mount and aluminum carrying case
Perception 420 is a multi-pattern large-diaphragm condenser microphone for more demanding professional studio recording applications. Offering high sensitivity and 155 dB maximum SPL, the Perception 420 delivers a warm transparent sound quality ideally suited for ensemble recording, grand piano, woodwind and brass instruments as well as drums and percussion instruments. In addition, three selectable polar patterns cardioid, omnidirectional or figure-eight allow a wide range of stereo miking techniques and ambient recording. A switchable bass cut filter and pre-attenuation pad enable the Perception 420 to be used close to sound sources in sound fields as high as 155 dB. The microphone's chassis is made of precision-tooled zinc/aluminum alloy and boasts a dent resistant stainless-steel wire-mesh front grille. It comes complete with a spider-type shock mount in an aluminum carrying case. AKG Perception 420 Microphone Specifications | Type | Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone | | Polar pattern | Cardioid, omnidirectional, figure-eight | | Frequency range | 20 to 20,000 Hz | | Sensitivity | 28 mV/Pa (-31 dBV) | | Max. SPL | 135/155 dB SPL (0/-20 dB) for 0.5% THD | | Equivalent noise level | 16 dB-A (IEC 60268-4) | | Signal/noise ratio (A-weighted) | 78 dB | | Preattenuation pad | 0 dB, -20 dB | | Bass filter | 12 dB/octave, 300 Hz | | Impedance | <=200 ohms | | Recommended load impedance | >=1000 ohms | | Current consumption | <=2 mA | | Power requirement | 48 V phantom power to DIN/IEC | | Connector | 3-pin XLR | | Finish | metallic blue/nickel grille | | Dimensions | 53 dia. X 165 mm/2 x 6.5 in. | | Net weight | 525 g (18.5 oz.) | | Shipping weight | 1,970 g (4.3 lb.) | |
