|
C562CM Boundary-Layer Microphone
- Small, low-profile boundary layer microphone
- Wide frequency range
- High sensitivity
- Ideal for inconspicuous installation in a room
- Suited for surveillance or recording
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
C562CM Boundary-Layer Microphone Specifications
| Polar pattern |
omnidirectional (hemispherical) |
| Frequency range |
20 to 20,000 Hz |
| Sensitivity |
25 mV/Pa (-32 dBV) |
| Max. SPL |
130 dB (k=1 %) |
| Equivalent noise level |
16 dB-A |
| Signal/noise ratio (A-weighted) |
78 dB |
| Impedance |
600 ohms |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 to 52 V phantom power to DIN/IEC |
| Current consumption |
<2 mA |
| Connector |
3-pin XLR |
| Cable |
0.5 m (20 in.) |
| Finish |
matte nickel plated |
| Net weight |
30 g (1.1 oz.) |
| Shipping weight |
195 g (76.9 oz.) |
|
