AKG C480B-ULS Microphone Preamplifier Module The AKG C480B-ULS is part of a system designed specifically for excellent audio quality and maximum flexibility. Its electronic circuitry coupled to a transformerless output stage assures completely linear transfer characteristics across the entire audio bandwidth, while achieving self-noise figures close to the theoretical minimum. This, in combination with a typical SPL handling capability of 140 dB broadband means a dynamic range exceeding 125 dB, making the system suitable for the most critical digital recording applications. Gold plated switch and connector contacts guarantee consistent performance. AKG C480B-ULS Microphone Features:
|  | Interchangeability | | The C 480B Power Module provides power to all supported CK series capsules. This design is convenient for users who require microphones supporting different polar patterns, depending on the situation. Among the supported capsules are the CK 61, 62, 63 and 69 ULS. |  | Switchable Attenuation | | Switchable attenuation pad with 0 and -10dB positions are provided. This provides an even greater SPL and allows close micing of sources that would otherwise overload the mic input. |  | Low Cut Roll Off | | The Low Cut (or bass) roll-off switch cuts low end rumble and wind noise registering in the low frequency spectrum. |  | Phantom Power | | +48 Volt phantom power is supported and powers any of the supported elements. | AKG C480B-ULS Microphone Specifications: Power Requirements | Phantom, 48v (+/-4v) | Output Impedance | 150 Ohms | Output Connectors | XLR-3M Type | Pad | Yes, Switchable +6,or -10 db | Low Frequency Roll-Off | Yes, -12db/Octave @ 75hz Or 150hz | Dimensions | 5.9 x 0.8" (149.86 x 20.32mm) LxD diameter | Weight | 7.25 oz. (205.4 g) | |