AKG C414BXLII Large Diaphragm Condenser

FREE audio-technica ATH-D40fs Headphones AND TWO HORIZON 20' CABLES!!!

A classic microphone with a distinctive timbre especially designedfor recording of solo vocals and solo instruments. With the introduction of the Next Generation C414BXL models, AKG sets new benchmarks for useful features, improved technical specifications, ease of use and available accessories. All of these improvements are answers to requests from ever-demanding recording studios, broadcast stations and concert engineers, but with the basic sonic character of the legendary C414 unaltered.

Five Selectable Patterns

High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 41 X external windscreen

Additional features: 

• High sound pressure level capability and wide dynamic range
• Completely immune to electrostatic and electromagnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
• Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
• All switchable components operate in low impedance circuits for ultra-high reliability even in extremely humid conditions
• Optional R 414 remote control unit (under development) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors

Specifications:

Polar pattern	Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Signal/noise ratio (A-weighted)	88 dB
Preattenuation pad	-6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope	12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance	<=200 ohms
Recommended load impedance	>= 2,200 ohms
Supply voltage	48 V phantom power to DIN/IEC
Current consumption	approximately 4.5 mA
Dynamic range	134 dB minimum
Connector	3-pin XLR to IEC
Dimensions	50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
Net weight	300 g (10.6 oz.)